WARD VACUUM
Oxygenx suction regulator provides reliable, safe suction in continuous flow suction procedures. It is used to remove substances from the patient`s body during surgical procedures, the vacuum regulator should be connected to a wall source of vacuum using a direct probe or through a rail system.
The unit is specifically designed to provide high flow rates with minimal restriction in the ward and operating room which require high level suction use for patients. The standard
inlet connection is compatible with the BS & DIN Gas outlet, however other inlet connections are available dependant on the hospital requirement.
Material specification:
- Jar –Polycarbonate & ABS / Autoclavable at 121 degree centrigade
- Internal metal (wet) parts- Brass
- Regulator Body – Aluminum / Plastic
- Diaphragm- Viton Rubber
Technical Data:
- Inlet Vacuum Level (Below Atmosphere) 450 mmHG (8.7 psig) Max
- Controllable Valve Level (Below Atmosphere) 0-450 mmHG (0 – 8.7 psig)
- Gauge range(Analog) negative pressure 0-760 mmHG (0-14.7 psig)
- Flow range 0-55 Lpm(min)